Resinoid Engineering
ResinoidEngineering Corporation
Billets and Plaques
• Quality Moldings with various Thermoset materials (Phenolic, Polyester, Composites)
• Used for new product R&D, creating - machining Samples or Prototypes
• Used for machining low quantity - demand production parts (saves Tooling costs)
| Billet Name | OD (In) | ID (In) | Thickness (In) | Comments |
|---|---|---|---|---|
| A1 | 7.38 | 5.25 X 2.37 Deep | 4.12 | Counterbore |
| A2 | 7.38 | 3.1 | 4.12 | |
| B1 | 4.50 | 1.8 | 3.25 | |
| B2 | 4.50 | 4.20 X .75 Deep | 3.25 | Counterbore |
| B3 | 4.50 | 2.50 X 1.63 Deep, Followed by 1.22 Thru | 5.88 | "Special" Config. |
| B4 | 4.50 | 1.87 X 1.14 Deep, Followed by .50 Thru | 3.25 | Counterbore |
| B5 | 4.50 | 0.81 | 3.25 | |
| B6 | 4.50 | 1 | 3.25 | |
| B7 | 4.50 | 1.3 | 3.25 | |
| B8 | 4.50 | 1.87 X 2.87 Deep | 3.25 | Counterbore |
| C3 | 9.29 | 5.3 X 1.8 Deep | 3.70 | Counterbore |
When requesting a quote for billets, please specify Billet Name, Raw Material and Quantity.
| Plaque Name | Length (In) | Width (In) | Thickness (In) | Comments |
|---|---|---|---|---|
| P8X12 | 12 | 8 | .18 - 1.00 |
When requesting a quote for plaques, please specify Plaque Name, Desired Thickness, Raw Material and Quantity.
"A" Series, "B" Series, and "C" Series Billets are available. OD and thickness is set within each billet series. ID can be adjusted if/as required.
8" X 12" Plaques are available in thicknesses ranging from .18" - 1.00".
Resinoid typically carries a limited inventory for R&D/prototyping purposes. Molded billet/plaque production is performed for customers as ordered.
